While pursuing a Master of Science in Mechanical Engineering, students may choose thermofluids as a concentration. Some of the representative research areas under this concentration may include thermodynamics, fluid dynamics, kinetic theory of gases, and thermophoresis of aerosols; microscale heat transfer phenomena and its effects on laser beam propagation; fundamentals of combustion such as burning speed and onset of auto-ignition measurement and flame stability analysis; development of chemistry reduction such as rate-controlled constrained-equilibrium method; formation and control of combustion-generated pollutants and greenhouse gases; chemistry, transport, and abatement of air pollution; alternative energy sources; combustion-based synthesis of materials; fire propagation, containment, and extinction; nonequilibrium thermodynamics; energy and gas turbine cooling technology; turbine blade cooling; and energy-related and calorimeter studies related to pharmaceutical developments. Our research and teaching together seek to prepare students to understand and exploit thermofluids to enable their future engineering innovations.
General Degree Requirements
To be eligible for admission to any of the MS degree programs, a prospective student must hold a Bachelor of Science degree in engineering, science, mathematics, or an equivalent field. Students in all master’s degree programs must complete a minimum of 32 semester hours of approved coursework (exclusive of any preparatory courses) with a minimum grade-point average of 3.000. Students can complete a master's degree by pursuing any of one of the three tracks: coursework option, project option, and thesis option. Specific degree requirements for each of these tracks can be found under the Program Requirements tab. Students may pursue any program either on a full-time or part-time basis; however, certain restrictions may apply.
Academic and Research Advisors
All nonthesis students are advised by the faculty advisor designated for their respective concentration or program. Students willing to pursue the thesis option must first find a research advisor within their first year of study. The research advisor will guide the students' thesis work, and thesis reader(s) may be assigned at the discretion of their research advisor. The research advisor must be a full-time or jointly appointed faculty. If the research advisor is outside the MIE department, before the thesis option can be approved, a faculty member with 51 percent or more appointments in the MIE department must be chosen as co-advisor, and a petition must be filed and approved by the co-advisor and the MIE Graduate Affairs Committee. Thesis option students are advised by the faculty advisor of their concentration before they select their research advisor(s). The research advisor and co-advisor must serve as thesis readers.
Plan of Study and Course Selection
It is recommended that all new students attend orientation sessions held by the MIE department and the Graduate School of Engineering to acquaint themselves with the coursework requirements and research activities of the department as well as with the general policies, procedures, and expectations.
In order to receive proper guidance with their coursework needs, all MS students are strongly encouraged to complete and submit a fully signed Plan of Study to the department before enrolling in second-semester courses. This form not only helps the students manage their coursework but it also helps the department to plan for requested course offerings. The PS form may be modified at any time as the students progress in their degree programs.
Students pursuing study or research under the guidance of a faculty member can choose project option by taking Master’s Project (ME 7945). An MS project must be petitioned to the MIE Graduate Affairs Committee and approved by both the faculty member (instructor for Master's Project) and the student's academic advisor. The petition must clearly state the reason for taking the project course; a brief description of the goals; as well as the expected outcomes, deliverables, and grading scheme.
Options for MS Students (Coursework Only, Project, or Thesis)
Students accepted into any of the MS programs in the MIE department can choose one of the three options: coursework only, project, or thesis. Please see the Program Requirements tab on the top menu of this page for more information. MS students who want to pursue project or thesis options must find, within the first year of their study, a faculty member or a research advisor who will be willing to direct and supervise a mutually agreed research project or MS thesis. Moreover, students who receive financial support from the university in the form of a research, teaching, or tuition assistantship must complete the thesis option (12 semester hours).
Students who complete the thesis option must make a presentation of their thesis before approval by the department. The MS thesis presentation shall be publicly advertised at least one week in advance and all faculty members and students may attend and participate. If deemed appropriate by the research advisor, other faculty members may be invited to serve as thesis readers to provide technical opinions and judge the quality of the thesis and presentation.
Change of Program/Concentration
Students enrolled in any of the MIE department programs or concentrations may change their current program or concentration no sooner than the beginning of their second full-time semester of study. In order for the program or concentration change request to be considered by the MIE Graduate Affairs Committee, the student must not be in the first semester of their current program, must have a 3.300 GPA, and have completed at least 8 semester hours of required coursework in their sought program at Northeastern.
Graduate Certificate Options
Students enrolled in a master's degree have the opportunity to also pursue one of the many engineering graduate certificate options in addition to or in combination with the MS degree. Students should consult their faculty advisor regarding these options.
Gordon Institute of Engineering Leadership
Master's Degree in Mechanical Engineering with Concentration in Thermofluids with Graduate Certificate in Engineering Leadership
Students may complete a Master of Science in Mechanical Engineering with Concentration in Thermofluids in addition to earning a Graduate Certificate in Engineering Leadership. Students must apply and be admitted to the Gordon Engineering Leadership Program in order to pursue this option. The program requires fulfillment of the 16-semester-hour curriculum required to earn the Graduate Certificate in Engineering Leadership, which includes an industry-based challenge project with multiple mentors. The integrated 36-semester-hour degree and certificate will require 20 semester hours of advisor-approved thermofluids technical courses. For students who concurrently enroll in the Graduate Certificate in Engineering Leadership, 12 semester hours of the certificate coursework may be applied to the elective requirements of this program’s coursework option.
Complete all courses and requirements listed below unless otherwise indicated.
Core Requirements
Course List | Code | Title | Hours |
| ME 6200 | Mathematical Methods for Mechanical Engineers 1 | 4 |
| ME 7270 | General Thermodynamics | 4 |
| ME 7275 | Essentials of Fluid Dynamics | 4 |
| ME 7285 | Heat Conduction and Thermal Radiation | 4 |
| or ME 7290 | Convective Heat Transfer |
| 4 |
| Solar Thermal Engineering | |
| Gas Turbine Combustion | |
| Aerodynamics | |
| Multiscale Flow and Transport Phenomena | |
| Combustion and Air Pollution | |
| Fundamentals of Combustion | |
| Computational Fluid Dynamics with Heat Transfer | |
Options
Complete one of the following options:
Coursework Option
Course List | Code | Title | Hours |
| 12 |
Project Option
Course List | Code | Title | Hours |
| ME 7945 | Master’s Project | 4 |
| 8 |
Thesis Option1
Course List | Code | Title | Hours |
| ME 7945 | Master’s Project | 4 |
| ME 7990 | Thesis | 4 |
| 4 |
| |
Course List
Course List | Code | Title | Hours |
| |
| Solar Thermal Engineering | |
| Gas Turbine Combustion | |
| Aerodynamics | |
| Multiscale Flow and Transport Phenomena | |
| Combustion and Air Pollution | |
| Fundamentals of Combustion | |
| Computational Fluid Dynamics with Heat Transfer | |
Optional Co-op Experience
Course List | Code | Title | Hours |
| |
| ENCP 6100 | Introduction to Cooperative Education | 1 |
| ENCP 6964 | Co-op Work Experience | 0 |
| or ENCP 6954 | Co-op Work Experience - Half-Time |
| or ENCP 6955 | Co-op Work Experience Abroad - Half-Time |
| or ENCP 6965 | Co-op Work Experience Abroad |
Program Credit/GPA Requirements
32 total semester hours required (33 with co-op experience)
Minimum 3.000 GPA required
