The Master of Science in Engineering Management offers graduate students an opportunity to develop both technical expertise and business competence that is in high demand among prospective technology-based employers. Industry leaders are seeking qualified and talented individuals who are not only able to guide research and design teams but also able to direct and supervise development and production processes. The combination of technical proficiency and business skills fostered in the engineering management program is designed to provide a competitive edge for graduates seeking a wide range of positions in technology-based product or service industries, as well as in comparable local, state, and federal agencies and programs.
The program was designed by experienced high-level managers and academic leaders as an option for engineers and scientists to broaden their skill sets to include management tools and techniques that are applicable to technology-based industries. Graduates of the engineering management program work as project managers or leaders of teams in technology-based industries. Upon completion of the program, students find that their acquired skills are applicable to a wide range of industries, primarily those focused upon the development of technical products and the management of technical projects.
Graduates may assist companies in bringing a product from an idea through its development phases to its introduction to the marketplace. They may also be involved in forming and managing teams for assessing cost-effectiveness, formulating strategies to improve production, or analyzing a company’s supply chain. Most of these projects cannot be successfully completed without the skills of those possessing a background in management decision making and engineering expertise; therefore, the engineering management graduate is often a technical liaison to all levels of management. As a result, many of the assignments held by engineering management graduates have actually proven to be a gateway to upper-level management positions.
The current program of study can be taken on a part-time or full-time basis on-ground or online. There are four core courses required of all students, which have been formulated to satisfy the foundation requirements of economic decision making, decision-making mathematics, and project management. In addition to these required courses, the curriculum consists of electives that allow students to choose either a broad-based program of study or one centered on a particular concentration. Some students may elect to refresh or enhance their technical skills in engineering-based subjects such as information systems, computer systems engineering, or graduate courses from the traditional engineering disciplines. Other students may prefer to broaden their knowledge base by selecting coursework in management subjects such as engineering organizational psychology, financial management, logistics and warehousing, supply chain engineering, or lean systems design. Additionally, students may also elect to complete the Gordon Engineering Leadership Program as part of their engineering management degree.
One recent graduate has observed that “Northeastern’s MSEM is like an MBA for engineers, with high-quality, dedicated professors who are proficient in their field yet are able to convey information in a way that’s easy to understand.” This graduate also noted, “My courses in project management have been key to understanding the subtleties that affect Project Managers while technical courses provide a strong background in fundamentals as well as specialty topics. My experience with co-op has been outstanding and has truly helped me further my career.”
General Degree Requirements
To be eligible for admission to any of the MS degree programs, a prospective student must hold a Bachelor of Science degree in engineering, science, mathematics, or an equivalent field. Students in all master’s degree programs must complete a minimum of 32 semester hours of approved coursework (exclusive of any preparatory courses) with a minimum grade-point average of 3.000. Students can complete a master's degree by pursuing any of one of the three tracks: coursework option, project option, and thesis option. Specific degree requirements for each of these tracks can be found under the Program Requirements tab. Students may pursue any program either on a full-time or part-time basis; however, certain restrictions may apply.
Academic and Research Advisors
All nonthesis students are advised by the faculty advisor designated for their respective concentration or program. Students willing to pursue the thesis option must first find a research advisor within their first year of study. The research advisor will guide the students' thesis work, and thesis reader(s) may be assigned at the discretion of their research advisor. The research advisor must be a full-time or jointly appointed faculty. If the research advisor is outside the MIE department, before the thesis option can be approved, a faculty member with 51% or more appointments in the MIE department must be chosen as co-advisor, and a petition must be filed and approved by the co-advisor and the MIE Graduate Affairs Committee. Thesis option students are advised by the faculty advisor of their concentration before they select their research advisor(s). The research advisor and co-advisor must serve as thesis readers.
Plan of Study and Course Selection
It is recommended that all new students attend orientation sessions held by the MIE department and the Graduate School of Engineering to acquaint themselves with the coursework requirements and research activities of the department as well as with the general policies, procedures, and expectations.
In order to receive proper guidance with their coursework needs, all MS students are strongly encouraged to complete and submit a fully signed Plan of Study to the department before enrolling in second-semester courses. This form not only helps the students manage their coursework, but it also helps the department to plan for requested course offerings. The PS form may be modified at any time as the students progress in their degree programs.
Students pursuing study or research under the guidance of a faculty member can choose project option by taking Master's Project (EMGT 7945). An MS project must be petitioned to the MIE Graduate Affairs Committee and approved by both the faculty member (instructor for Master's Project) and the student's academic advisor. The petition must clearly state the reason for taking the project course; a brief description of the goals; as well as the expected outcomes, deliverables, and grading scheme.
Options for MS Students (Coursework Only, Project, or Thesis)
Students accepted into any of the MS programs in the MIE department can choose one of the three options: coursework only, project, or thesis. Please see the Program Requirements tab on the top menu of this page for more information. MS students who want to pursue project or thesis options must find, within the first year of their study, a faculty member or a research advisor who will be willing to direct and supervise a mutually agreed research project or MS thesis. Moreover, students who receive financial support from the university in the form of a research, teaching, or tuition assistantship must complete the thesis option. Students are strongly encouraged to complete 4 semester hours of Master's Project (EMGT 7945) followed by 4 semester hours of Thesis (EMGT 7990) over two consecutive semesters.
Students who complete the thesis option must make a presentation of their thesis before approval by the department. The MS thesis presentation shall be publicly advertised at least one week in advance and all faculty members and students may attend and participate. If deemed appropriate by the research advisor, other faculty members may be invited to serve as thesis readers to provide technical opinions and judge the quality of the thesis and presentation.
Change of Program/Concentration
Students enrolled in any of the MIE department programs or concentrations may change their current program or concentration no sooner than the beginning of their second full-time semester of study. In order for the program or concentration change request to be considered by the MIE Graduate Affairs Committee, the student must not be in the first semester of their current program, must have a 3.300 GPA, and have completed at least 8 semester hours of required coursework in their sought program at Northeastern.
Graduate Certificate Options
Students enrolled in a master's degree have the opportunity to also pursue one of the many engineering graduate certificate options in addition to or in combination with the MS degree. Students should consult their faculty advisor regarding these options.
Gordon Institute of Engineering Leadership
Master's Degree in Engineering Management with Graduate Certificate in Engineering Leadership
Students may complete a Master of Science in Engineering Management in addition to earning a Graduate Certificate in Engineering Leadership. Students must apply and be admitted to the Gordon Engineering Leadership Program in order to pursue this option. The program requires fulfillment of the 16-semester-hour curriculum required to earn the Graduate Certificate in Engineering Leadership, which includes an industry-based challenge project with multiple mentors. The integrated 32-semester-hour degree and certificate will require 16 hours of advisor-approved engineering management technical courses. For students who concurrently enroll in the Graduate Certificate in Engineering Leadership, 16SH of the certificate coursework may be applied to the elective requirements of this program's coursework option.
Galante Engineering Business Program
Master's Degree in Engineering Management with Graduate Certificate in Engineering Business
Students may complete a Master of Science in Engineering Management in addition to earning a Graduate Certificate in Engineering Business. Students must apply and be admitted to the Galante Engineering Business Program in order to pursue this option. The program requires the applicant to have earned or be in a program to earn a Bachelor of Science in Engineering from Northeastern University or another accredited university/college within the U.S. The integrated 32-semester-hour degree and certificate will require 16 semester hours of the engineering management core courses and 16 semester hours from the outlined business-skill curriculum. The coursework, along with participation in cocurricular professional development elements, earn the Graduate Certificate in Engineering Business.
Core Requirements
Complete all courses and requirements listed below unless otherwise indicated. Students may not register for more than 9 semester hours in the fall, spring, and summer terms.
Course List | Code | Title | Hours |
| EMGT 5220 | Engineering Project Management | 4 |
| EMGT 6225 | Economic Decision Making | 4 |
| IE 6200 | Engineering Probability and Statistics | 4 |
| OR 6205 | Deterministic Operations Research | 4 |
Options
Complete one of the following options:
Coursework Option
Course List | Code | Title | Hours |
| 8 |
Project Option
Course List | Code | Title | Hours |
| EMGT 7945 | Master's Project | 4 |
| 4 |
Thesis Option1
Online Option
Course List | Code | Title | Hours |
| 8 |
| |
Optional Co-op Experience
Course List | Code | Title | Hours |
| |
| ENCP 6100 | Introduction to Cooperative Education | 1 |
| ENCP 6964 | Co-op Work Experience | 0 |
| or ENCP 6954 | Co-op Work Experience - Half-Time |
| or ENCP 6955 | Co-op Work Experience Abroad - Half-Time |
| or ENCP 6965 | Co-op Work Experience Abroad |
Concentration or Electives Option
A concentration is not required. Students may complete electives in lieu of a concentration.
Program Credit/GPA Requirements
32 total semester hours required (33 with optional co-op)
Minimum 3.000 GPA required
Digital Product Management Concentration
Course List | Code | Title | Hours |
| EMGT 6700 | Digital Product Design and Management | 4 |
| EMGT 6750 | Advanced Product Management | 4 |
Electives Option
Course List | Code | Title | Hours |
| 8 |
Elective Course List
Course List | Code | Title | Hours |
| User Experience Design and Testing | |
| Data Management and Database Design | |
| Engineering/Organizational Psychology | |
| Financial Management for Engineers | |
| Engineering Team Performance | |
| Digital Product Design and Management | |
| Fundamentals of the Platform Economy | |
| Fundamentals of Energy System Integration | |
| Customer-Driven Technical Innovation for Engineers | |
| Engineering Product Design Methodology | |
| Iterative Product Prototyping for Engineers | |
| Product Development for Engineers | |
| Computational Modeling in Industrial Engineering | |
| Special Topics in Industrial Engineering | |
| Structured Data Analytics for Industrial Engineering | |
| Healthcare Systems Modeling and Analysis | |
| Systems Engineering in Public Programs | |
| Lean Concepts and Applications
and Recitation for IE 5617 | |
| Data Mining for Engineering Applications | |
| Manufacturing Systems Design | |
| Human Performance | |
| Computation and Visualization for Analytics | |
| Elective | |
| Supply Chain Engineering | |
| Simulation Analysis | |
| Intelligent Manufacturing | |
| Data Mining in Engineering | |
| Statistical Methods in Engineering | |
| Statistical Quality Control | |
| Reliability Analysis and Risk Assessment | |
| Human Factors Engineering | |
| Special Topics in Industrial Engineering | |
| Neural Networks and Deep Learning | |
| Business Analysis and Information Engineering | |
| Agile Software Development | |
| Organizational Change and IT | |
| Managerial Communications for Engineers | |
| Mathematical Methods for Mechanical Engineers 1 | |
| Metaheuristics and Applications | |
| Elective | |
| Probabilistic Operation Research | |
| Integer and Nonlinear Optimization | |
| Network Analysis and Advanced Optimization | |
| Convex Optimization and Applications | |
| Logistics, Warehousing, and Scheduling | |
| Special Topics in Operations Research | |
| Data Networking | |
| |
| |
| Collecting, Storing, and Retrieving Data | |
| Business Planning for New Ventures | |
| Business Model Design and Innovation | |
| Emerging and Disruptive Technologies | |
| Entrepreneurial Marketing and Selling | |
| Lean Design and Development | |
| Managing a Technology-Based Business | |
| The Technical Entrepreneur as Leader | |
| Enterprise Growth and Innovation | |
| Logistics and Transportation Management | |
| Global Supply Chain Strategy | |
| Sourcing and Procurement | |
| Supply Chain Analytics | |
| Sustainability and Supply Chain Management | |
| Managing Healthcare Supply Chain Operations | |
| Demand Planning and Forecasting | |
Online Course List
Course List | Code | Title | Hours |
| Engineering/Organizational Psychology | |
| Financial Management for Engineers | |
| Fundamentals of Energy System Integration | |
| Data Mining for Engineering Applications | |
| Manufacturing Systems Design | |
| Supply Chain Engineering | |
| Simulation Analysis | |
| Statistical Methods in Engineering | |
| Statistical Quality Control | |
| Reliability Analysis and Risk Assessment | |
| Human Factors Engineering | |
| Business Analysis and Information Engineering | |
| Mathematical Methods for Mechanical Engineers 1 | |
| Probabilistic Operation Research | |
| Integer and Nonlinear Optimization | |
| Logistics, Warehousing, and Scheduling | |
